How to Start ID Cards Lamination Business to Earn Money — ID Cards lamination business maybe a small business but if you can get many clients it becomes a small business with big profits. ID Cards lamination as a business is easy to set-up because it can be a home-based business, and the investment is very minimal at P6,500 including consumables (if you already have a computer and printer set). The hard part is getting a supplier and clients.
ID Cards Lamination Business is very profitable because aside from ID cards lamination you could also offer other services like signage making, and less risky if you already have potential clients. You only look for customers who regularly need corporate ID Cards, school ID Cards, VIP or discount cards, membership cards and signages, among others.
For a P6,500 investment, you can already make 500 ID Cards. This package offered by Ronrox Corporation includes a heavy duty laminator, standard ID mold cutter, 3-in-1 slot puncher and 50 sets of PVC film.
However, aside from those equipment and materials, you should also have a computer set and printer that uses pigment ink. Since ID Cards should be made to last, pigment ink is used so that the image or print won’t fade easily. This particular ink is not water-based so even if the ID Cards get wet the print won’t smear.
The laminator machine consumes only 250 watts and has light indicators. So you would know when the machine is ready to start laminating. The slot puncher, on the other hand, has three uses: creating oblong or round hole and curving edges. The PVC film is composed of two parts, the printable side, which is the transparent one, and the adhesive part or the middle layer.
ID Cards Lamination Business 150×150 How to Start ID Cards Lamination Business to Earn Money9 Easy Steps in ID Lamination Business to Work
Step 1: Using your computer, lay out the IDs in A4 size document, as the PVC film has the same size. It will be good to place all the fronts of the IDs on one side (lengthwise) and the backs on the other side. Print the images on the printable side of the transparent PVC films.
Step 2: Cut the PVC film lengthwise. Put a pair of printable sheets together and tape one edge to align the images. Make sure that the images on this pair would be the front and back of the ID. Set aside.
Step 3: Get the adhesive part of the PVC film and peel off the plastic covering both sides. Put the adhesive in between the printed sheets.
Step 4: Preheat the laminator machine for a few minutes and set it to 120 0C.
Step 5: Once the green light is on, start laminating the PVC film. The machine has three buttons: the Plastic Seal, Clockwise and Start buttons. The start button should be pressed when laminating. The Plastic Seal button, however, should be turned off if you’re doing cold lamination.
Step 6: After laminating the PVC, cut it into individual ID pieces using the mold cutter.
Step 7: Create a hole using the slot puncher, which can create either a round hole or an oblong one.
Step 8: You’ll notice that the IDs are still matte finish so you have to laminate them again.
Step 9: After the second lamination, peel off the plastic cover on both sides and it will become glossy. There, your IDs are now ready.
It holds true for the ID lamination business. Although it is profitable because aside from ID lamination one could also offer other services like signage making, it will be less risky if you already have potential clients. Look for customers who regularly need corporate IDs, school IDs, VIP or discount cards, and signages, among others.
For a P6,500 investment, one can already make 500 IDs. This package offered by Ronrox Corporation includes a heavy duty laminator, standard ID mold cutter, 3-in-1 slot puncher and 50 sets of PVC film.
However, aside from those equipment and materials, one should also have a computer set and printer that uses pigment ink. Since IDs should be made to last, pigment ink is used so that the image or print won’t fade easily. This particular ink is not water-based so even if the ID gets wet the print won’t smear.
The laminator machine consumes only 250 watts and has light indicators. So one would know when the machine is ready to start laminating. The slot puncher, on the other hand, has three uses: creating oblong or round hole and curving edges. The PVC film is composed of two parts, the printable side, which is the transparent one, and the adhesive part or the middle layer.
Costing:
A single PVC film, which costs P30, can make 10 standard size IDs. Ronrox estimates that a single print consumes about 2ml of ink. If 1ml of ink costs P3, you?re spending P6 per printable sheet. So the production cost for 10 IDs is PVC film @ P30 + ink for two sheets @ P12 + electricity @ P0.50 = P42.50 / 10 IDs = P4.25 each ID.
The price of corporate IDs range from P100 to P300 while school IDs are priced at around P80 to P150. What a hefty markup! But remember that this computation still does in factor in your labor cost or the salaries of your workers.
TIP: To close deals with companies and schools or stores, give them either discounts or commission. For example, if a school usually sells the ID to its students for P150, offer your product at a bulk rate of P80, P100 or P120 each.
For more information on how to get ID cards lamanination supplies, please contact:
Ronrox Corporation
Unit 16 Grace Park Commercial Complex
J. Teodoro St., 4th Avenue, Caloocan City
Telephones: (02) 365-3025, 497-5950
Website: www.ronrox.com.ph